[Free] 2018(June) Dumps4cert Microsoft 70-341 Dumps with VCE and PDF Download 161-170

Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 May Microsoft Official New Released 70-341
100% Free Download! 100% Pass Guaranteed!

Core Solutions of Microsoft Exchange Server 2013

Question No: 161 – (Topic 7)

You have an Exchange Server 2013 organization that contains 5,000 mailboxes. A user named User1 tests several Windows Phone devices.

You need to ensure that User1 can connect more than 20 Windows Phone devices to his mailbox,

Which cmdlet should you run?

  1. Set-ThrottlingPolicy

  2. Set-MobileMailboxPolicy

  3. Set-ActiveSyncMailboxPolicy

  4. Set-CasMailbox

Answer: A

Question No: 162 – (Topic 7)

You have an Exchange Server 2013 organization that contains two Client Access servers named SERVER1 and SERVER2 and two Mailbox servers named 5ERVER3 and SERVER4.

You have a firewall that controls all of the traffic between the internal network and the Internet.

SERVER3 and SERVER4 are prevented from communicating with Internet hosts.

SERVER1 and SERVER3 are in a site named Main. 5ERVER2 and SERVER4 are in a site named Main_2.

All outbound email is sent through SERVER1. Main fails.

You discover that email messages for the Internet are queued on SERVER4. You create a new send connector in Main_2.

You discover that all of the outbound email is queued on 5ERVER4 and is not delivered to the Internet.

You verify that the client computers on the network can receive email messages from the Internet successfully.

You need to ensure that the email messages are delivered successfully to the Internet. Which cmdlet should you run?

  1. Set-SendConnector

  2. Set-TransportService

  3. Set-ExchangeServer

  4. Set-ADSite

Answer: A

Question No: 163 – (Topic 7)

You have an exchange Server 2013 organization that contains one server.

A user named User 1 report that he cannot view several email messages from his mobile device. He confirms that he can view the email messages by using Microsoft Outlook.

You need to enable and view the Exchange ActiveSync log for User1. Which two actions should you perform?

Each correct answer presents part of the solution.

  1. Run the Get-CasMailbox cmdlet.

  2. Modify the TraceSessions.config file.

  3. Run the Set-Mailbox cmdlet.

  4. Run the Set-CasMailbox cmdlet.

  5. Run the Get-MobileDeviceStatistics cmdlet

Answer: A,E

Question No: 164 – (Topic 7)

Your network contains an Active Directory forest. The forest contains a single domain named contoso.com. You have an Exchange Server 2013 organization named Contoso.

You plan to create an additional SMTP domain named sales.contoso.com. You will use sales.contoso.com as the primary SMTP address for the users in the sales department.

You create a new email address policy and apply the policy to the sales users.

New sales users report that when they attempt to access their email from the Internet for the first time by using Microsoft Outlook 2010, they fail to connect. The sales users connect to their mailbox internally successfully by using Outlook 2010. All other users can connect to their mailbox from the Internet and internally.

You need to ensure that the new sales users can connect to the Exchange Server 2013 organization by using Outlook Anywhere from the Internet.

Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

  1. Modify each existing Service Connection Point (5CP) object in Active Directory to point to autodiscover.sales.contoso.com.

  2. From DNS Manager, create a host (A) record for autodiscover.sales.contoso.com.

  3. On the Client Access servers, deploy a new certificate that includes the autodiscover.sales.contoso.com name.

  4. Create a new Autodiscover virtual directory on the Client Access servers and configure ExternalURL to use autodiscover.sales.contoso.com.

  5. Create a new Service Connection Point (SCP) object in Active Directory that points to autodiscover.sales.contoso.com.

Answer: B,C

Question No: 165 – (Topic 7)

You have an Exchange Server 2013 organization that contains a database availability

group (DAG) named DAG1. DAG1 has two members.

You create a mailbox database copy for each database on each DAG member.

You plan to implement a service level agreement (SLA) that meets the following requirements:

All deleted mailboxes must be recoverable for up to six months after they are deleted. When a mailbox is recovered, the entire contents of the mailbox must be recovered.

You need to recommend a solution that meets the requirements. What should you recommend?

  1. Get-Mailbox | Set-Mailbox -RetainDeletedItemsFor 180.00:00:00

  2. Get-MailboxDatabase | Set-MailboxDatabase -MailboxRetention 180.00:00:00

  3. Get-MailboxDatabase | Set-MailboxDatabase -DeletedItemRetention 180.00:00:00

  4. Get-Mailbox | Set-Mailbox -Audit Log Age Limit 180.00:00:00

Answer: B

Question No: 166 HOTSPOT – (Topic 7)

Your network contains three Exchange Server 2013 servers that have the Client Access server role installed. Each server is configured as a POP3 server and an IMAP4 server.

You deploy the Network Load Balancing (NLB) feature on the servers and configure NLB as shown in the exhibit (Click the Exhibit button.)

Dumps4Cert 2018 PDF and VCE

Use the drop-down menus to select the answer choice that completes each statement.

Dumps4Cert 2018 PDF and VCE

Dumps4Cert 2018 PDF and VCE

Answer:

Dumps4Cert 2018 PDF and VCE

Question No: 167 HOTSPOT – (Topic 7)

Your company has an Exchange Server 2013 organization. The company hires 200 temporary employees.

You create a mailbox for each temporary employee.

You create a new management role named CustomBaseOptions that uses MyBaseOptions as a parent. You create a new management role named CustomContactInfo that uses MyContactInfo as a parent.

You plan to apply the new management roles to the temporary employees.

You need to identify which management roles must be modified to prevent the temporary employees from performing the following task:

-> Adding a user photo

-> Viewing delivery reports

-> Viewing the Install Apps feature

-> Changing the value of the office location

Which management roles should you identify?

To answer, select the appropriate management role for each task in the answer area.

Dumps4Cert 2018 PDF and VCE

Dumps4Cert 2018 PDF and VCE

Answer:

Dumps4Cert 2018 PDF and VCE

Explanation:

Box 1: CustomBaseOption

Box 2: CustomBaseOption

Box 3: CustomBaseOption

Box 4: CustomContactInfo

Question No: 168 – (Topic 7)

You have an Exchange Server organization. The organization contains a server named EX01 that has Exchange Server 2010 installed and a server named EX02 that has Exchange Server 2013 installed.

Your mailbox is hosted on EX01.

You need to access the Exchange Admin Center (EAC).

Which URL should you use?

  1. https://EX01/ecp?ExchClientVer= 14

  2. https://EX02/ecp?ExchClientVer= 15

  3. https://EX02/eac?ExchClientVer=15

  4. https://EX01/ecp?ExchCfientVer=15

Answer: B

Question No: 169 DRAG DROP – (Topic 7)

You have an Exchange Server 2013 organization.

You plan to delegate the following administrative tasks:

-> View the status of the message queue.

-> Create, mount, and dismount databases.

-> Restore mailboxes from a recovery database,

-> Modify the settings of Exchange ActiveSync devices.

You need to identify which role group must be used to delegate each administrative task.

The solution must ensure that the role group that has the fewest administrative privileges is used.

Which role groups should you identify? {To answer, drag the appropriate role groups to the correct tasks. Each role group may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)

Dumps4Cert 2018 PDF and VCE

Answer:

Dumps4Cert 2018 PDF and VCE

Question No: 170 – (Topic 7)

Your network contains an Active Directory forest named contoso.com. The forest contains one domain.

You have an Exchange Server organization that contains three servers. The servers are configured as shown in the following table.

Dumps4Cert 2018 PDF and VCE

An administrator implements Outlook Anywhere on Exchange Server 2013.

Remote users who have a mailbox hosted on EX1 report that they receive the following error message when they attempt to configure a Microsoft Outlook profile.

Dumps4Cert 2018 PDF and VCE

Remote users who have a mailbox hosted on EX3 can configure an Outlook profile successfully.

You need to ensure that the remote users who have a mailbox on EX1 can access their mailbox by using Outlook Anywhere.

What should you do?

  1. On EX2, run Set-OutlookAnywhere

  2. On EX2, run Set-CasMailbox.

  3. On EX1, run Enable-OutlookAnywhere

  4. On EX1, run Set-OutlookAnywhere

Answer: C

100% Dumps4cert Free Download!
Download Free Demo:70-341 Demo PDF
100% Dumps4cert Pass Guaranteed!
Download 2018 Dumps4cert 70-341 Full Exam PDF and VCE

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No