[Free] 2019(Nov) EnsurePass IBM C9010-022 Dumps with VCE and PDF 51-60

Get Full Version of the Exam

Question No.51

In the following output, what do the ec and pc columns mean?


  1. Program counter and entitled CPUs

  2. Physical processors consumed and entitled capacity consumed

  3. Processor count and extra cores

  4. Pages compressed and elapsed context switches

  5. Pool compression and external compression

Correct Answer: B

Question No.52

How can an administrator determine if DLPAR operations can be performed for a specific LPAR?

  1. Run the Isdlpar -partition command on the local HMC.

  2. Run the IsrsrclBM.MCP command on the LPAR.

  3. Run the Iparstat -dlpar command on the LPAR.

  4. Run the rmcctrl -d command on the local HMC.

Correct Answer: A

Question No.53

Solid State Drives (SSDs) have been added to a POWER7 system, and the administrator would like to migrate filesystems with high I/O activity to the SSDs. What TWO options or commands will assist the administrator with identifying filesystem activity? (Select two)

  1. svmon

  2. tprof

  3. filemon

  4. Hot File Detection

  5. fileplace

Correct Answer: CD

Question No.54

In order to enable an AIX host to use one virtual Ethernet adapter to communicate on multiple VLANs, what is required?

  1. The VLAN devices used by the host must be configured with IP addresses on different subnets.

  2. The virtual Ethernet adapter must be set to full duplex in AIX.

  3. VLAN devices must be configured in the AIX host.

  4. The virtual Ethernet adapter must be configured as a trunk adapter.

Correct Answer: C

Question No.55

An administrator wants to reorganize some of the logical volumes in the datavg volume group.What TWO things must the administrator verify before starting the reorganization? (Select 2)

  1. Enough free physical partitions exist to accommodate the largest logical volume being reorganized.

  2. At least one free physical partition exists.

  3. That noneof the logical volumes contain a paging space.

  4. The logical volumes being reorganized are relocatable.

  5. Quorum has been disabled for the volume group.

  6. The volume group descriptor area (VGDA) has room to expand.

  7. That any raw logical volumes beingre-organized are closed.

Correct Answer: BD

Question No.56

A system administrator needs to create a new volume group (VG) which will contain 100 physical volumes. The physical volumes are 10GB in size. The company plans to increase from 100 to 150 physical volumes over a two year period. To ensure the VG can meet initial demand and grow without requiring changesat later date, what type of VG should be created?

  1. Create VG as a Big volume group.

  2. Create a volume group setting each physical partition size to 1024 MB.

  3. Create VG as a Scalable volume group.

  4. Create VG using the t-factor attribute

Correct Answer: C

Question No.57

Which level of information does the mpstat command provide when run inside an LPAR?

  1. The simultaneous multi-threading LPAR profile setting.

  2. Overall managed system logical processors utilization.

  3. Performance statistics for all logical processors inside the LPAR.

  4. Number of online physical processors in the pool where the LPAR resides.

Correct Answer: C

Question No.58

An AIX LPAR has been saved using the mksysb command to a file called LPAR1_mksysb located in the /backup directory. Which command displays the contents of the mksysb backup?

  1. mksysb-v-f/backup/LPAR1_mksysb

  2. restore -Tqf /backup/LPAR1_mksysb

  3. listvgbackup -f/backup/LPAR1_mksysb

  4. backup-i -v-f/backup/LPAR1_mksysb

Correct Answer: C

Question No.59

Users on a server are receiving errors stating that they cannot fork any additional processes. The administrator checks server paging space and finds that it is only 5% used. What is the next most likely cause of theforking issue and what action should be taken to resolve it?

  1. Corruption has occurred to the bos.rte.control fileset. Reinstall the fileset with the -f option.

  2. The number of fixed licenses has been reached. Use #39;chlicense#39; to increase the limit andreboot the system.

  3. System requires additional table space as well as paging space. Check the table space and increase as required.

  4. The system has the default maxuproc system attribute. This should be increased to a value appropriate for the environment.

Correct Answer: D

Question No.60

Whiletrying to extend a filesystem /work an administrator receives the following error: 0516- 787 extendlv: Maximum allocation for logical volume fslv00 is 256. What must be done to allow the filesystem to be extended?

  1. Change the filesystem option of maxsz to 512 for the filesystem /work with the command chfs -a maxsz=512 /work.

  2. Change the maximum Logical Partitions to 512forthefslv00 with the command chlv- x512fslv00.

  3. Change the volume groups maximum Logical Partitions per Logical Volume to 512 with thechvg -t 512 vg01.

  4. Change the logical volume type to jfs2 as jfs logical volumes cannot extend passed 256 with the command chfs -v jfs2 -m /work.

Correct Answer: B

Get Full Version of the Exam
C9010-022 Dumps
C9010-022 VCE and PDF